<?xml version="1.0" encoding="UTF-8"?><!-- generator="WordPress/2.9.2" -->
<rss version="0.92">
<channel>
	<title>Cheap Vinyl Cutters</title>
	<link>http://www.cheapvinylcutters.com</link>
	<description>Everything You Need To Know About About The Cutters, Software, Cables and Fanfare to Cut Vinyl.</description>
	<lastBuildDate>Fri, 13 Feb 2009 00:00:10 +0000</lastBuildDate>
	<docs>http://backend.userland.com/rss092</docs>
	<language>en</language>
	
	<item>
		<title>New Vinyl Cutters From ProCut</title>
		<description><![CDATA[ProCut has released two new vinyl cutters in their CR series. The ProCut CR1300FB and CR730FB now round out the top end of the CR series from ProCut. The sizes remain the same at 24" and 48" however all the vinyl cutters now come with a feed basket attached to the stand. This is a [...]]]></description>
		<link>http://www.cheapvinylcutters.com/frequently-asked-questions/new-vinyl-cutters-from-procut</link>
			</item>
	<item>
		<title>5 Minute Sign Making</title>
		<description><![CDATA[This is a fun video I made for the beginner or potential sign maker on how to make  sign in less than 5 minutes with SignCutX2, Inkscape, and the ProCut CR-630 from JZGraphics.com.

]]></description>
		<link>http://www.cheapvinylcutters.com/how-to/5-minute-sign-making</link>
			</item>
	<item>
		<title>Making Signs with the CR-630 Creation ProCut Vinyl Cutter</title>
		<description><![CDATA[Here is a small tutorial I recorded about how easy it is to make vinyl signs using some freely available software called "InkScape". Inkscape has the ability to draw just like any other program, but unlike other programs, it can save the files in a format called EPS. EPS is a vinyl cutter friendly format [...]]]></description>
		<link>http://www.cheapvinylcutters.com/how-to/making-signs-with-the-cr-630-creation-procut-vinyl-cutter</link>
			</item>
	<item>
		<title>Inkscape Wont Run On 10.4, Font Cache Error Message, Dissapears from Dock, No Suitable Image</title>
		<description><![CDATA[This is due to a disparity between the version of X11 Compiled with Inkscape and the local version of X11. To fix this, you need to install the X11 update from Apple. http://support.apple.com/downloads/X11_Update_2006_1_1_3 
If X11 is open, close it, install the update. Inkscape should run. If it doesnt, try a fresh uninstall reinstall.
]]></description>
		<link>http://www.cheapvinylcutters.com/fixing-problems/inkscape-wont-run-on-104-font-cache-error-message-dissapears-from-dock</link>
			</item>
	<item>
		<title>Flexi-P Needs Code and Username and Password</title>
		<description><![CDATA[The username and password for Flexi-P Is located on the small, purple USB key included with your cutter. It will be in a grey/silver anti-static plastic bag.
]]></description>
		<link>http://www.cheapvinylcutters.com/frequently-asked-questions/flexi-p-needs-code-and-username-and-password</link>
			</item>
	<item>
		<title>How to Setup Your CR-630 or CR-1200 by ProCut</title>
		<description><![CDATA[If you cannot get your cutter working, check that you've followed these steps carefully.
1) Turn your cutter off, and plug it into a free USB port on your computer. The new hardware wizard should appear, or if you've already done this, it should go "Bing Bong"
2) On the cutter, hit the online screen. You should [...]]]></description>
		<link>http://www.cheapvinylcutters.com/frequently-asked-questions/how-to-setup-your-cr-630-or-cr-1200-by-procut</link>
			</item>
	<item>
		<title>Pro Cut 1200 or 630 Vinyl Cutter LCD is blank, and cutter won&#8217;t boot up.</title>
		<description><![CDATA[Their are two red buttons on either end of the carriage. These buttons make sure that the carriage wont bang against the side of the cutter if it gets some bad information. However, the cutter WILL NOT boot up if one of these buttons is depressed. This means that if the carriage is all the [...]]]></description>
		<link>http://www.cheapvinylcutters.com/fixing-problems/pro-cut-1200-or-630-vinyl-cutter-lcd-is-blank-and-cutter-wont-boot-up</link>
			</item>
	<item>
		<title>HASP Key Drivers for Flexi Apprentice</title>
		<description><![CDATA[If you have a purple HASP key that is not being recognized by windows, and you cannot open Flex-P you need to install the drivers for it. The latest drivers are available here:
 Aladdin HASP Key Drivers
]]></description>
		<link>http://www.cheapvinylcutters.com/fixing-problems/hasp-key-drivers-for-flexi-apprentice</link>
			</item>
	<item>
		<title>ProCut CR-630 USB Drivers Blue Screen Windows</title>
		<description><![CDATA[If you've installed the drivers on your ProCut CR-630 Signature Series and you're getting a blue screen when you plug in your USB plug, you have an old version of drivers and need to update:
VCP Drivers for Windows XP/2000/Vista WHQL Certified 
]]></description>
		<link>http://www.cheapvinylcutters.com/fixing-problems/procut-cr-630-usb-drivers-blue-screen-windows</link>
			</item>
	<item>
		<title>Refine Cutter Not Tracking in the Y Axis (When Cutting Vertically)</title>
		<description><![CDATA[ Common Causes:
1) Make sure your pinch rollers are the same tension.
2) Make sure you have the proper blade offset.
3) Your pinch rollers may be just plain worn out. If the above two didn't work, try replacing the rollers. One year of use is their average effective lifetime.
]]></description>
		<link>http://www.cheapvinylcutters.com/frequently-asked-questions/refine-cutter-not-tracking-in-the-y-axis-when-cutting-vertically</link>
			</item>
</channel>
</rss>
