New Vinyl Cutters From ProCut

ProCut has released two new vinyl cutters in their CR series. The ProCut CR1300FB and CR730FB now round out the top end of the CR series from ProCut. The sizes remain the same at 24" and 48" however all the vinyl cutters now come with a feed basket attached to the stand. This is a huge improvement over previous CR Series cutters because it allows for rapid mass production. A "Fire and forget" type of method if you will. This is a step towards the more serious cutter brands like Mutoh, Roland, and Graphtec.

So, what's different? The biggest difference is that they feature USB 2.0. Instead of a serial->USB chip built in to the cutter, they are now native USB. This is advantageous for a couple of reasons: Less drivers, Less complicated drivers.

In addition it features: More accurate stepper motors, Larger LCD Screen, standard included feed basket.

ProCut CR1300FB Details

-  Brand: ProCut
-  Model: CR1300FB
-  Max Paper Width: 51” (1300mm)
-  Max Cutting Width: 47” (1195mm)
-  Max Cutting Speed 400 mm/s
-  Motherboard: 32-bit ARM7 CPU
-  Driver: High-Speed Stepping Motor, Micro-Step Driver
-  Cutting Force: 0-800 Grams
-  Mechanism Precision : 0.05mm
-  Repeatability: <+-0.01mm
-  Command Set: DMPL, HPGL
-  Interface: USB 2.0
-  Three Pinch Rollers
-  Power Requirements: 110V AC

ProCut CR730FB Details

-  Brand: ProCut
-  Model: CR730FB
-  Max Paper Width: 28.7” (730mm)
-  Max Cutting Width: 24.6” (625mm)
-  Max Cutting Speed 400 mm/s
-  Motherboard: 32-bit ARM7 CPU
-  Driver: High-Speed Stepping Motor, Micro-Step Driver
-  Cutting Force: 0-800 Grams
-  Mechanism Precision : 0.05mm
-  Repeatability: <+-0.01mm
-  Command Set: DMPL, HPGL
-  Interface: USB 2.0
-  Three Pinch Rollers
-  Power Requirements: 110V AC

You can buy both of these cutters @ http://www.cutterpros.com