Cheap Vinyl Cutters

Refine Cutter Not Tracking in the Y Axis (When Cutting Vertically)

Common Causes:

1) Make sure your pinch rollers are the same tension.

2) Make sure you have the proper blade offset.

3) Your pinch rollers may be just plain worn out. If the above two didn’t work, try replacing the rollers. One year of use is their average effective lifetime.

This entry was posted on Thursday, October 25th, 2007 at 7:45 pm and is filed under FAQ, Fixing Problems. You can follow any responses to this entry through the RSS 2.0 feed. You can leave a response, or trackback from your own site.

2 Responses to “Refine Cutter Not Tracking in the Y Axis (When Cutting Vertically)”

DL Says:
May 17th, 2008 at 5:29 am
How do you 1) change the pinch rollers and 2) make sure the blade is offset properly?
DL Says:
May 17th, 2008 at 6:47 am
How do you adjust the tension of the pinch rollers?

Refine Cutter Not Tracking in the Y Axis (When Cutting Vertically)

2 Responses to “Refine Cutter Not Tracking in the Y Axis (When Cutting Vertically)”

Leave a Reply